Name: 3D Printer RepRap MKS TFT32 touch screen smart controller 3.2inch
MKS-TFT32 is a colorful touch screen LCD, designed by Makerbase(MKS).
It is suitable for many main board, such as MKS BASE, MKS GEN,
MKS MINI, MKS SBASE, etc.
But can’t work with Ramps1.4.
1pcs*8G SD card
1.32 inch colorful touch screen, support U disk and SD card.
2.Support continual and easy software update.
3.Support MKS Wifi module.
4.No need to adjust firmware, support Marlin, Smoothieware and Repetier.
5.Support keeping printing and saving of outage. Also exhausted material detection.
6.Support logo and button customization .
7.Support user define function.
Please visit our github to download firmware: github.com/makerbase
MKS TFT32 Dimension
MKS TFT32 Connector
Connect to MKS GEN
No need V12 external power, connect to Aux-1 of mainboard.
Connect to MKS BASE,MKS MINI
Step1: turn on MKS TFT32 at first time, then enter --> setting --> connection, select baud rate that the firmware use.
Step2: enter --> setting -->model, choose printer type,
only Delta and other two options
Others: enter --> setting --> touch screen correction, improving accuracy.
Copy the latest update firmware to SD card root directory, including:
1. mkstft32.bin. 2. mks_config.txt. 3. mks_pic.
Please do not adjust the file name.
Insert SD card, it will update automatically after restarts.
When is halted state on printing, then can turn it off directly.
It will keep working on last halted state when next time use.
Continuous Printing after Halted State
If power break off during printing, it can continue printing from off place after restarting.
(Motor driver can not work after power cuts, it will cause defective models if the print head remains in the model, you need to improve power failure, detection module and UPS.)
1. Connect signal S of outage detection module to PB0 pin,
cathode and anode connect to the -/+ of PB0 pin.